Antifreeze Fosser FA 12 200l concentrate G12
- Numbers:
- FOS1402200
- Brand:
- Fosser
- Warehouses:
Antifreeze Fosser FA 12 200l concentrate G12
FOSSER Antifreeze FA 12 is a radiator frost protection agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Thanks to the optimised combination of highly stable inhibitors made from silicate-free carboxylic acid technology, it provides excellent and lasting protection against corrosion and cavitation. Other additives prevent deposits and foaming of the coolant.FOSSER Antifreeze FA 12 offers maintenance-free year-round frost and corrosion protection during the entire service life of the engine. The product does not have any negative effect on coolant hoses or cylinder head gaskets.
FOSSER Antifreeze FA 12 mixed with the required amount of water can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals and radiator systems made in aluminium or copper alloys. FOSSER Antifreeze FA 12 is particularly recommended for light-alloy engines where the aluminium must be protected against the effect of increased temperatures. It can be mixed with most coolants based on ethylene glycol. We recommend maintaining a concentration of 50% (vol.) during all seasons.
Caution: Observe manufacturer instructions.
Recommendations*:
MB 325.3
MAN 324 SNF
VW TL 774 D/F
frost protection | rate of antifreeze | rate of water |
-20°C | 1 rate | 2 rates |
-27°C | 1 rate | 1,5 rates |
-36°C | 1 rate | 1 rate |
TYPICAL VALUES | METHOD | UNIT | FOSSER Antifreeze FA 12 |
Density at 20°C | DIN 51 757 | g/cm3 | 1.125 |
Reserve alkalinity (pH 5.5) | ASTM D 1121 | ml 0,1 n HCI | 28 |
Boiling point | ASTM D 1120 | °C | >163 |
pH | ASTM D 1287 | - | 8.6 |
COC flash point | DIN 51 758 | °C | >120 |
Frost protection at 50% (vol.) | ASTM D 1177 | °C | - 36 |
Colour | red |
The above values may vary within commercially accepted tolerances
* meets the requirements of the OEM manufacturer
- Weight: 225 kg.
- Approvals/recommendations: MB approval 325.3, MAN 324 SNF, VW TL 774 D/F
- Measure, l: 200