Gear oil

Oil Fosser Dexron ATF-A 1l

FOS11011

Brand: Fosser Germany

Warehouses: Kaunas (10)

Vilnius Len (10)

Klaipėda (1)

Šiauliai (2)

Kauno prd (2)

Price: 8.00
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron ATF-A 4l

FOS11014

Brand: Fosser Germany

Warehouses: Kaunas (7)

Vilnius Len (1)

Šiauliai (2)

Kauno prd (1)

Price: 29.00
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D II 1l

FOS11021

OE number: Dexron II

Brand: Fosser Germany

Warehouses: Kiti sandėliai (2)

Price: 7.00
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D II 1l

Use:

• Automatic motor vehicle transmissions and torque converters

• Manual transmissions for which ATF must be used

• Hydrostatic transmissions

• Power steering systems

• Hydraulic systems

Observe manufacturer instructions!

Properties:

• High viscosity index

• High load capacity, outstanding wear minimisation

• Low pour point

• No foaming

• High thermal stability

• Safe friction coefficient characteristic

• Excellent viscosity-temperature behaviour

• Outstanding oxidation stability

• No effect on conventional sealing materials

Recommendations*:

General Motors Dexron II D

MB 236.6

MAN 339 type Z-1 / V-1

Allison C-4
CAT TO-2
Renk Doromat
Voith list 55.6335.32
ZF TE-ML 03D/04D/11A/14A/17C

TYPICAL VALUES	METHOD	UNIT	FOSSER Dexron D II
Density at 15°C	DIN 51 757	g/cm3	0.870
Viscosity at 40°C	DIN ISO 3104	mm2/s	40
Viscosity at 100°C	DIN ISO 3104	mm2/s	8.0
_-{}-Viscosity index (VI)	DIN ISO 2909	-	171
COC flash point	DIN ISO 2592	°C	185
Pour point	DIN ISO 3016	°C	- 45
Colour	-	-	red

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.87 kg.

Approvals/recommendations: General Motors Dexron II D, MB approval 236.6, MAN 339 type Z-1 / V-1, Allison C-4, CAT TO-2, Renk Doromat, Voith list 55.6335.32, ZF TE-ML 03D/04D/11A/14A/17C
Oil type: Transmission Fluids
Measure, l: 1

Transmission Type: for automatic transmission
Weight [kg]: 0,93
Capacity [litre]: 1
Colour: red
Specification: Ford WSS-M2C138-CJ
Observe service information:

Oil Fosser Dexron D II 20l

FOS110220

OE number: Dexron II

Brand: Fosser Germany

Warehouses

Price: 106.30
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D II 208l

FOS1102208

OE number: Dexron II

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 1.264.70
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D II 4l

FOS11024

OE number: Dexron II

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (3)

Klaipėda (6)

Šiauliai (2)

Kauno prd (2)

Price: 21.90
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D II 60l

FOS110260

OE number: Dexron II

Brand: Fosser Germany

Warehouses: Kaunas (5)

Vilnius Len (1)

Price: 240.10
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D III-H red 1l

FOS11031

OE number: Dexron III

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (> 10)

Klaipėda (6)

Šiauliai (5)

Panevėžys (6)

Kauno prd (6)

Price: 7.50
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D III-H red 1l

Use:

• Automatic motor vehicle transmissions and torque converters

• Hydrostatic transmissions

• Power steering systems

• Hydraulic systems

Observe manufacturer instructions!

Properties:

• Extremely high viscosity index

• High load capacity, outstanding wear minimisation

• Low pour point

• No foaming

• High thermal stability

• Safe friction coefficient characteristic

• Excellent viscosity-temperature behaviour

• Outstanding oxidation stability

• No effect on conventional sealing materials

Recommendations*:

General Motors Dexron® III-H

MB 236.1 / 236.5 / 236.6 / 236.7

MAN 339 type Z-1 / V-1

Ford Mercon
Allison C-4
CAT TO-2
Voith list H55.6335.3x(G607)
Volvo 97341
ZF TE-ML 03D/04D/09/11/14A/17C

TYPICAL VALUES	METHOD	UNIT	FOSSER Dexron III-H
Density at 15°C	DIN 51 757	g/cm3	0.860
Viscosity at 40°C	DIN ISO 3104	mm2/s	36
Viscosity at 100°C	DIN ISO 3104	mm2/s	7.5
Viscosity index (VI)	DIN ISO 2909	-	176
COC flash point	DIN ISO 2592	°C	176
Pour point	DIN ISO 3016	°C	- 48
Colour	-	-	red/yellowish

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.86 kg.

Measure, l: 1
Oil type: Transmission Fluids
Approvals/recommendations: General Motors Dexron® III-H MB approval 236.1 / 236.5 / 236.6 / 236.7, MAN 339 type Z-1 / V-1, Ford Mercon, Allison C-4, CAT TO-2, Voith H55.6335.3x (G607), Volvo 97341, ZF TE-ML 03D/04D/09/11/14A/17C

Capacity [litre]: 20
Packing Type: Canister
Specification: JASO 1-A
Oil: Full Synthetic Oil
Manufacturer Approval: 0
Packaging length [cm]: 29,5
Packaging width [cm]: 23,7
Packaging height [cm]: 42,8
Oil manufacturer recommendation: DEXRON
JASO specification: 1-A
Customs tariff number: 34031980

Oil Fosser Dexron D III-H red 20l

FOS110320

OE number: Dexron III

Brand: Fosser Germany

Warehouses: Kaunas (2)

Vilnius Len (1)

Šiauliai (1)

Price: 108.00
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D III-H red 208l

FOS1103208

OE number: Dexron III

Brand: Fosser Germany

Warehouses

Price: 968.10
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D III-H red 4l

FOS11034

OE number: Dexron III

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (2)

Šiauliai (2)

Panevėžys (4)

Price: 22.40
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Dexron D III-H red 60l

FOS110360

OE number: Dexron III

Brand: Fosser Germany

Warehouses: Kaunas (2)

Price: 299.90
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 4 1l

FOS11041

Brand: Fosser Germany

Warehouses: Kaunas (6)

Vilnius Len (> 10)

Klaipėda (4)

Šiauliai (6)

Panevėžys (> 10)

Kauno prd (2)

Kiti sandėliai (1)

Price: 7.60
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 4 1l

FOSSER MZ 80W-90 GL-4 is made from carefully chosen base oils and additives. The EP additives contained in the gear oil form a load-bearing lubricant film between the tooth flanks when the gears intermesh. This layer reduces abrasion on the tooth flanks during movement of the gears under high mechanical load. The gear oil is extremely aging resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refinery of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion. FOSSER MZ 80W-90 GL-4 does not cause damage to conventional sealing materials.

FOSSER MZ 80W-90 GL-4 is recommended for use in manual transmissions, steering gears and axle drives in passenger and commercial vehicles (not suitable for hypoid gears).

Specifications:

API GL-4 • MIL-L-2105

Recommendations*:

MB 235.1

MAN 341 type Z-2

MAN 341 type E-1

Ford SQM-2C-9008 A

ZF TE-ML 02B/17A

TYPICAL VALUES	METHOD	UNIT	FOSSER MZ 80W-90 GL-4
SAE class	DIN 51 511	-	80W-90
Density at 15°C	DIN 51 757	g/cm3	0.897
Viscosity at -12°C	DIN 51 398	mm2/s	-
Viscosity at -26°C	DIN 51 398	mm2/s	129.000
Viscosity at 40°C	DIN ISO 3104	mm2/s	114
Viscosity at 100°C	DIN ISO 3104	mm2/s	11,9
Viscosity index (VI)	DIN ISO 2909	-	92
COC flash point	DIN ISO 2592	°C	220
Pour point	DIN ISO 3016	°C	- 30
FZG test A/8.3/90	DIN 51 354	SKS	>12

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.89 kg.

API class: GL-4
Measure, l: 1
Approvals/recommendations: MB 235.1, MAN 341 type Z-2, MAN 341 type E-1, Ford SQM-2C-9008 A, ZF TE-ML 02B/17A
Specification: MIL-L-2105
Viscosity: 80W90
Oil type: Transmission fluids

Oil Fosser MZ 80W-90 GL 4 20l

FOS110420

Brand: Fosser Germany

Warehouses: Kaunas (2)

Price: 94.00
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 4 20l

FOSSER MZ 80W-90 GL-4 is made from carefully chosen base oils and additives. The EP additives contained in the gear oil form a load-bearing lubricant film between the tooth flanks when the gears intermesh. This layer reduces abrasion on the tooth flanks during movement of the gears under high mechanical load. The gear oil is extremely aging resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refinery of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion. FOSSER MZ 80W-90 GL-4 does not cause damage to conventional sealing materials.

FOSSER MZ 80W-90 GL-4 is recommended for use in manual transmissions, steering gears and axle drives in passenger and commercial vehicles (not suitable for hypoid gears).

Specifications:

API GL-4 • MIL-L-2105

Recommendations*:

MB 235.1

MAN 341 type Z-2

MAN 341 type E-1

Ford SQM-2C-9008 A

ZF TE-ML 02B/17A

TYPICAL VALUES	METHOD	UNIT	FOSSER MZ 80W-90 GL-4
SAE class	DIN 51 511	-	80W-90
Density at 15°C	DIN 51 757	g/cm3	0.897
Viscosity at -12°C	DIN 51 398	mm2/s	-
Viscosity at -26°C	DIN 51 398	mm2/s	129.000
Viscosity at 40°C	DIN ISO 3104	mm2/s	114
Viscosity at 100°C	DIN ISO 3104	mm2/s	11,9
Viscosity index (VI)	DIN ISO 2909	-	92
COC flash point	DIN ISO 2592	°C	220
Pour point	DIN ISO 3016	°C	- 30
FZG test A/8.3/90	DIN 51 354	SKS	>12

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 17.88 kg.

API class: GL-4
Oil type: Transmission fluids
Approvals/recommendations: MB 235.1, MAN 341 type Z-2, MAN 341 type E-1, Ford SQM-2C-9008 A, ZF TE-ML 02B/17A
Specification: MIL-L-2105
Viscosity: 80W90
Measure, l: 20

Oil Fosser MZ 80W-90 GL 4 208l

FOS1104208

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 913.50
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 4 4l

FOS11044

Brand: Fosser Germany

Warehouses: Šiauliai (1)

Price: 23.50
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 4 60l

FOS110460

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 387.50
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 5 1l

FOS11051

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (> 10)

Klaipėda (4)

Šiauliai (4)

Panevėžys (> 10)

Kauno prd (2)

Kiti sandėliai (2)

Price: 8.30
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 5 1l

FOSSER MZ 80W-90 GL-5 is made from carefully chosen base oils and additives. The EP additives in the product form a load-bearing lubricant film on the tooth flanks that prevent fretting even under extreme mechanical load and significantly reduce abrasion. The gear oil is extremely aging resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refinery of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion. FOSSER MZ 80W-90 GL-5 does not cause damage to conventional sealing materials.

FOSSER MZ 80W-90 GL-5 is recommended for gear systems with hypoid and bevel gears used in axle drive systems in passenger and commercial vehicles. It is also widely used in motorbike universal drive systems and manual gearboxes, unless the use of an engine oil is prescribed.

Specifications:

API GL-5 • MIL-L-2105 C/D

Recommendations*:

MB 235.0

MAN 342 type M-1

Ford SQM-2C-9002 AA

ZF TE-ML 16C/17B/19B/21A

Voith 3.325-339

Volvo 97310

DAF

TYPICAL VALUES	METHOD	UNIT	FOSSER MZ 80W-90 GL-5
SAE class	DIN 51 511	-	80W-90
Density at 15°C	DIN 51 757	g/cm3	0.897
Viscosity at -12°C	DIN 51 398	mm2/s	-
Viscosity at -26°C	DIN 51 398	mm2/s	130.000
Viscosity at 40°C	DIN ISO 3104	mm2/s	140
Viscosity at 100°C	DIN ISO 3104	mm2/s	13,9
Viscosity index (VI)	DIN ISO 2909	-	98
COC flash point	DIN ISO 2592	°C	210
Pour point	DIN ISO 3016	°C	- 30
FZG test A/8.3/90	DIN 51 354	SKS	>12

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.897 kg.

API class: GL-5
Measure, l: 1
Approvals/recommendations: MB approval 235.0, MAN 342 Typ M-1, Ford SQM-2C-9002 AA, ZF TE-ML 16C/17B/19B/21A, Voith 3.325-339, Volvo 97310, DAF
Specification: MIL-L-2105 C/D
Viscosity: 80W90
Oil type: Transmission Fluids

Oil Fosser MZ 80W-90 GL 5 20l

FOS110520

Brand: Fosser Germany

Warehouses

Price: 71.52
101.6

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 5 208l

FOS1105208

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 1.073.60
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 5 208l

FOSSER MZ 80W-90 GL-5 is made from carefully chosen base oils and additives. The EP additives in the product form a load-bearing lubricant film on the tooth flanks that prevent fretting even under extreme mechanical load and significantly reduce abrasion. The gear oil is extremely aging resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refinery of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion. FOSSER MZ 80W-90 GL-5 does not cause damage to conventional sealing materials.

FOSSER MZ 80W-90 GL-5 is recommended for gear systems with hypoid and bevel gears used in axle drive systems in passenger and commercial vehicles. It is also widely used in motorbike universal drive systems and manual gearboxes, unless the use of an engine oil is prescribed.

TYPICAL VALUES	METHOD	UNIT	FOSSER MZ 80W-90 GL-5
SAE class	DIN 51 511	-	80W-90
Density at 15°C	DIN 51 757	g/cm3	0.897
Viscosity at -12°C	DIN 51 398	mm2/s	-
Viscosity at -26°C	DIN 51 398	mm2/s	130.000
Viscosity at 40°C	DIN ISO 3104	mm2/s	140
Viscosity at 100°C	DIN ISO 3104	mm2/s	13,9
Viscosity index (VI)	DIN ISO 2909	-	98
COC flash point	DIN ISO 2592	°C	210
Pour point	DIN ISO 3016	°C	- 30
FZG test A/8.3/90	DIN 51 354	SKS	>12

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 185.96 kg.

API class: GL-5
Measure, l: 208
Viscosity: 80W90
Specification: MIL-L-2105 C/D
Approvals/recommendations: MB approval 235.0, MAN 342 Typ M-1, Ford SQM-2C-9002 AA, ZF TE-ML 16C/17B/19B/21A, Voith 3.325-339, Volvo 97310, DAF
Oil type: Transmission Fluids

Oil Fosser MZ 80W-90 GL 5 4l

FOS11054

Brand: Fosser Germany

Warehouses: Kaunas (8)

Vilnius Len (4)

Klaipėda (1)

Šiauliai (2)

Price: 30.40
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 5 4l

FOSSER MZ 80W-90 GL-5 is made from carefully chosen base oils and additives. The EP additives in the product form a load-bearing lubricant film on the tooth flanks that prevent fretting even under extreme mechanical load and significantly reduce abrasion. The gear oil is extremely aging resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refinery of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion. FOSSER MZ 80W-90 GL-5 does not cause damage to conventional sealing materials.

FOSSER MZ 80W-90 GL-5 is recommended for gear systems with hypoid and bevel gears used in axle drive systems in passenger and commercial vehicles. It is also widely used in motorbike universal drive systems and manual gearboxes, unless the use of an engine oil is prescribed.

Specifications:

API GL-5 • MIL-L-2105 C/D

Recommendations*:

MB 235.0

MAN 342 type M-1

Ford SQM-2C-9002 AA

ZF TE-ML 16C/17B/19B/21A

Voith 3.325-339

Volvo 97310

DAF

TYPICAL VALUES	METHOD	UNIT	FOSSER MZ 80W-90 GL-5
SAE class	DIN 51 511	-	80W-90
Density at 15°C	DIN 51 757	g/cm3	0.897
Viscosity at -12°C	DIN 51 398	mm2/s	-
Viscosity at -26°C	DIN 51 398	mm2/s	130.000
Viscosity at 40°C	DIN ISO 3104	mm2/s	140
Viscosity at 100°C	DIN ISO 3104	mm2/s	13,9
Viscosity index (VI)	DIN ISO 2909	-	98
COC flash point	DIN ISO 2592	°C	210
Pour point	DIN ISO 3016	°C	- 30
FZG test A/8.3/90	DIN 51 354	SKS	>12

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 3.588 kg.

API class: GL-5
Measure, l: 4
Approvals/recommendations: MB approval 235.0, MAN 342 Typ M-1, Ford SQM-2C-9002 AA, ZF TE-ML 16C/17B/19B/21A, Voith 3.325-339, Volvo 97310, DAF
Specification: MIL-L-2105 C/D
Viscosity: 80W90
Oil type: Transmission Fluids