Oils for trucks and buses

FOS101520

Brand: Fosser Germany

Warehouses

Price: 177.44
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Turbo Ultra LA 5W-30 20l

FOSSER Turbo LA is a synthetic high-performance low-friction engine oil for commercial vehicles. The oil is a low-SAPS product with significantly reduced sulphated ash, phosphorus and sulphur content. Thanks to the use of high-performance additives, the oil offers excellent oxidation and high-temperature stability. The good dispersing properties of the product prevent deposits in the engine and on pistons that could otherwise impair the performance of the engine. At very low ambient temperatures a reliable cold start and fast oil supply to all lube points is guaranteed. It is able to cope with all extreme conditions and to reduce friction loss and wear. It also improves the efficiency of engines as both oil and fuel consumption is reduced and the service life of the engine is prolonged.

FOSSER Turbo LA has been specially developed for the economic supply of emission-optimised engines with exhaust gas aftertreatment systems (Euro IV and V). The product is also recommended for use in CNG engines. FOSSER Turbo LA is designed for year-round use under any operating conditions and ensures that exhaust gas aftertreatment systems can work efficiently over significantly prolonged oil change intervals.

TYPICAL VALUES	METHOD	UNIT	FOSSER Turbo LA
SAE class	DIN 51 511	-	5W- 30
Density at 15°C	DIN 51 757	g/cm3	0,856
Viscosity at – 30°C (CCS)	DIN 51 377	mPa s	6170
Viscosity at 40°C	DIN 51 562	mm2/s	69
Viscosity at 100°C	DIN 51 562	mm2/s	12
Viscosity index (VI)	DIN ISO 2909	-	>145
COC flash point	DIN ISO 2592	°C	>218
Pour point	DIN ISO 3016	°C	- 36
Total base number	DIN ISO 3771	mgKOH/g	10
Sulphated ash	DIN 51 575	g/100 g	0,8

The above values may vary within commercially accepted tolerances

Weight: 17.1 kg.

API class: CI-4
Approvals/recommendations: MB 228.51 MAN M 3477 / M 3271 VDS-3 Renault RLD-2/RXD/RDG Deutz DQC IV-10 LA MTU Typ 3.1 Mack EO-N Cummins CES 20076/20077
ACEA class: E6 / E7
Oil type: Truck and commercial vehicle lubricants
Measure, l: 20
Viscosity: 5W30

Oil Fosser Drive TS 10W-30 4l

FOS10194

Brand: Fosser Germany

Warehouses: Kaunas (2)

Vilnius Len (2)

Klaipėda (3)

Panevėžys (1)

Šiauliai (4)

Price: 25.98
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive TS 10W-30 4l

FOSSER Drive TS is a semi-synthetic high-performance low-friction engine oil of viscosity class SAE 10W-30. Its base oil composition combines the advantages of modern refinery products with those of synthetic components. The base oil composition and shear resistant VI enhancers ensure that the product retains its specified viscosity properties during the entire lubrication time. The ageing process of this engine oil is well managed over the permissible maximum oil change interval. Antioxidants and cleaning additives prevent deposits, keep pistons and valves clean and protect the engine against cold sludge. The low friction loss in the engine significantly reduces fuel consumption and emissions. Low evaporation loss prevents deposits in valves, sludging and laking, so that pistons and piston ring grooves are kept clean.

FOSSER Drive TS is recommended for use in all petrol or diesel engines in passenger cars including models with diesel turbochargers and catalytic converters.

TYPICAL VALUES	METHOD	UNIT	FOSSER Drive TS
SAE class	DIN 51 511	-	10W-30
Density at 15°C	DIN 51 757	g/cm3	0.870
Viscosity at -25°C	DIN 51 377	mPa s	6500
Viscosity at 40°C	DIN 51 562	mm2/s	75
Viscosity at 100°C	DIN 51 562	mm2/s	11.5
Viscosity index (VI)	DIN ISO 2909	-	140
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 36
Total base number	DIN ISO 3771	mgKOH/g	8.5
Sulphated ash	DIN 51 575	g/100 g	1.0

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 3.48 kg.

API class: SL / CF
Oil type: Light and light commercial vehicle lubricants
ACEA class: A3 / B4
Approvals/recommendations: MB 229.1 VW standard 505.00 Toyota Jeep
Measure, l: 4
Viscosity: 10W30

Oil Fosser Drive TS 10W-30 5l

FOS10195

Brand: Fosser Germany

Warehouses: Kaunas (9)

Vilnius Len (2)

Klaipėda (3)

Šiauliai (4)

Price: 32.31
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Turbo 10W-40 20l

FOS102220

Brand: Fosser Germany

Warehouses

Price: 68.97
142.27

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Turbo 10W-40 208l

FOS1022208

Brand: Fosser Germany

Warehouses: Kaunas (2)

Vilnius Len (1)

Price: 612.26
1417.98

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Turbo 10W-40 208l

Semi-synthetic base oils and additives tailor-made to meet the high practical requirements ensure excellent properties under tough operating conditions. FOSSER Drive Turbo

• Is suitable for year-round use and ensures reliable cold start

• Reduces cold start wear by means of short engine lubrication times

• Offers high temperature safety

• Reduces fuel and oil consumption, thus protecting the environment

• Has an excellent dirt dispersing capacity and prevents sludge.

• Prolongs the service life of the engine

• Allows for extended oil change intervals

FOSSER Drive Turbo is the ideal oil for operators of mixed vehicle fleets. Using just one engine oil product, storage costs can be reduced and confusion of oils is made impossible. Thanks to its excellent diesel performance, FOSSER Drive Turbo is suitable for use in all commercial vehicles and construction machines, including turbocharger vehicles. The product also is recommended for petrol and diesel passenger car engines with or without turbocharger.

Specifications:

ACEA E7/E5/E3/B4/B3/A3 • API SL/CI-4

Recommendations*:

MB 228.3 / 229.1

MAN M 3275

Volvo VDS-3

TYPICAL VALUES	METHOD	UNIT	FOSSER Drive Turbo
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.870
Viscosity at -25°C	DIN 51 377	mPa s	6700
Viscosity at 40°C	DIN 51 562	mm2/s	92
Viscosity at 100°C	DIN 51 562	mm2/s	14.0
Viscosity index (VI)	DIN ISO 2909	-	156
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 39
Total base number	DIN ISO 3771	mgKOH/g	11.5
Sulphated ash	DIN 51 575	g/100 g	1.29

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 180.96 kg.

API class: SL, CI-4
Measure, l: 208
ACEA class: E7, E5, E3, B4, B3, A3
Approvals/recommendations: MB 228.3 / 229.1, MAN M 3275, Volvo VDS-3
Viscosity: 10W40
Oil type: Truck and commercial vehicle lubricants

Oil Fosser Drive Turbo 10W-40 60l

FOS102260

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 420.89
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Turbo 10W-40 60l

Semi-synthetic base oils and additives tailor-made to meet the high practical requirements ensure excellent properties under tough operating conditions. FOSSER Drive Turbo

• Is suitable for year-round use and ensures reliable cold start

• Reduces cold start wear by means of short engine lubrication times

• Offers high temperature safety

• Reduces fuel and oil consumption, thus protecting the environment

• Has an excellent dirt dispersing capacity and prevents sludge.

• Prolongs the service life of the engine

• Allows for extended oil change intervals

FOSSER Drive Turbo is the ideal oil for operators of mixed vehicle fleets. Using just one engine oil product, storage costs can be reduced and confusion of oils is made impossible. Thanks to its excellent diesel performance, FOSSER Drive Turbo is suitable for use in all commercial vehicles and construction machines, including turbocharger vehicles. The product also is recommended for petrol and diesel passenger car engines with or without turbocharger.

Specifications:

ACEA E7/E5/E3/B4/B3/A3 • API SL/CI-4

Recommendations*:

MB 228.3 / 229.1

MAN M 3275

Volvo VDS-3

TYPICAL VALUES	METHOD	UNIT	FOSSER Drive Turbo
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.870
Viscosity at -25°C	DIN 51 377	mPa s	6700
Viscosity at 40°C	DIN 51 562	mm2/s	92
Viscosity at 100°C	DIN 51 562	mm2/s	14.0
Viscosity index (VI)	DIN ISO 2909	-	156
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 39
Total base number	DIN ISO 3771	mgKOH/g	11.5
Sulphated ash	DIN 51 575	g/100 g	1.29

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 52.2 kg.

API class: SL, CI-4
Measure, l: 60
ACEA class: E7, E5, E3, B4, B3, A3
Approvals/recommendations: MB 228.3 / 229.1, MAN M 3275, Volvo VDS-3
Viscosity: 10W40
Oil type: Truck and commercial vehicle lubricants

Oil Fosser Drive Turbo Plus USHPD 10W-40 20l

FOS102320

Brand: Fosser Germany

Warehouses: Vilnius Len (1)

Price: 75.02
142.27

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Turbo Plus USHPD 10W-40 20l

FOSSER Drive Turbo plus USHPD is a high-alloy USHPD low-friction engine oil. Thanks to the use of synthetic base oils and a specially developed additive system, the oil offers excellent oxidation and high-temperature stability. The good dispersing properties of the product prevent deposits on pistons and in the engine that could otherwise impair the performance of the engine. At very low ambient temperatures, FOSSER Drive Turbo plus USHPD guarantees a reliable cold start and fast oil supply to all lube points. The oil is able to cope with all extreme conditions and to reduce friction loss and wear. It also improves the efficiency of engines as both oil and fuel consumption are reduced and the service life of the engine is significantly prolonged.

FOSSER Drive Turbo plus USHPD has been specially developed for the economic oil supply of diesel engines of all types in commercial vehicles. FOSSER Drive Turbo plus USHPD is suitable for year-round use and also meets the requirements of older aspirating engines and stationary diesel units. Oil change intervals might be extended to over 100.000 km, depending on the manufacturer instructions.

Specifications:

ACEA E7/E5/E4 • API CI-4

Approval:

MAN M 3277 / M 3277 CRT

Recommendations*:

MB 228.5

Volvo VDS 3

SCANIA LDF-2
Renault Trucks RXD/RLD 2
Deutz DQC III-05
MTU type 3

TYPICAL VALUES	METHOD	UNIT	FOSSER Drive Turbo plus USHPD
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.866
Viscosity at -25°C	DIN 51 377	mPa s	6500
Viscosity at 40°C	DIN 51 562	mm2/s	89
Viscosity at 100°C	DIN 51 562	mm2/s	13
Viscosity index (VI)	DIN ISO 2909	-	156
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 39
Total base number	DIN ISO 3771	mgKOH/g	15
Sulphated ash	DIN 51 575	g/100 g	1.3

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 17.32 kg.

API class: CI-4
Measure, l: 20
ACEA class: E7, E5, E4
Approvals/recommendations: MB 228.5, Volvo VDS-3, SCANIA LDF-2, Renault Trucks RXD/RLD 2, Deutz DQC III-05, MTU type 3
Viscosity: 10W40
Oil type: Truck and commercial vehicle lubricants

Oil Fosser Drive Turbo Plus USHPD 10W-40 208l

FOS1023208

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 1.417.98
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Turbo Plus USHPD 10W-40 60l

FOS102360

Brand: Fosser Germany

Warehouses

Price: 420.89
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Turbo Plus USHPD 10W-40 60l

FOSSER Drive Turbo plus USHPD is a high-alloy USHPD low-friction engine oil. Thanks to the use of synthetic base oils and a specially developed additive system, the oil offers excellent oxidation and high-temperature stability. The good dispersing properties of the product prevent deposits on pistons and in the engine that could otherwise impair the performance of the engine. At very low ambient temperatures, FOSSER Drive Turbo plus USHPD guarantees a reliable cold start and fast oil supply to all lube points. The oil is able to cope with all extreme conditions and to reduce friction loss and wear. It also improves the efficiency of engines as both oil and fuel consumption are reduced and the service life of the engine is significantly prolonged.

FOSSER Drive Turbo plus USHPD has been specially developed for the economic oil supply of diesel engines of all types in commercial vehicles. FOSSER Drive Turbo plus USHPD is suitable for year-round use and also meets the requirements of older aspirating engines and stationary diesel units. Oil change intervals might be extended to over 100.000 km, depending on the manufacturer instructions.

Specifications:

ACEA E7/E5/E4 • API CI-4

Approval:

MAN M 3277 / M 3277 CRT

Recommendations*:

MB 228.5

Volvo VDS 3

SCANIA LDF-2
Renault Trucks RXD/RLD 2
Deutz DQC III-05
MTU type 3

TYPICAL VALUES	METHOD	UNIT	FOSSER Drive Turbo plus USHPD
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.866
Viscosity at -25°C	DIN 51 377	mPa s	6500
Viscosity at 40°C	DIN 51 562	mm2/s	89
Viscosity at 100°C	DIN 51 562	mm2/s	13
Viscosity index (VI)	DIN ISO 2909	-	156
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 39
Total base number	DIN ISO 3771	mgKOH/g	15
Sulphated ash	DIN 51 575	g/100 g	1.3

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 51.96 kg.

API class: CI-4
Measure, l: 60
ACEA class: E7, E5, E4
Approvals/recommendations: MB 228.5, Volvo VDS-3, SCANIA LDF-2, Renault Trucks RXD/RLD 2, Deutz DQC III-05, MTU type 3
Viscosity: 10W40
Oil type: Truck and commercial vehicle lubricants

Oil Fosser Drive Turbo plus LA 10W-40 20l

FOS102720

Brand: Fosser Germany

Warehouses

Price: 142.27
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Turbo plus LA 10W-40 208l

FOS1027208

Brand: Fosser Germany

Warehouses

Price: 840.95
1417.98

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Turbo plus LA 10W-40 5l

FOS10275

Brand: Fosser Germany

Warehouses: Kaunas (3)

Vilnius Len (1)

Price: 36.08
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Garant SHPD 15W-40 208l

FOS1032208

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 627.99
1216.58

More information
Analogues
OE numbers
Adaption

Oil Fosser Garant SHPD 15W-40 208l

FOSSER Garant SHPD is a multi-grade engine oil for year-round use. Engines with turbocharger and charge air cooling require engine oils that can withstand higher thermal and mechanical loads. FOSSER Garant SHPD meets the requirements for such demanding operating conditions even at extended oil change intervals. It ensures a reliable cold start at low ambient temperatures and proper lubrication at high operating temperatures. Thanks to the use of shear-resistant active agents, the product retains its SAE class 15W-40 properties across the entire oil change interval.

FOSSER Garant SHPD is recommended for heavy-duty diesel engines of trucks, commercial vehicles and passengers cars. It can also be used in petrol engines. Engine oils of this class are generally recommended where oil change intervals are extended.

Specifications:

ACEA E7/E5/E3/B4/A3 • API CI-4/SL

Recommendations*:

MB 228.3 / 229.1

MAN M 3275

Volvo VDS-3

Cummins 20076/20077/20078

MTU type 2

Mack EO-M Plus

Renault RLD-2

Caterpillar ECF-1a

JASO DH-1

TYPICAL VALUES	METHOD	UNIT	FOSSER Garant SHPD
SAE class	DIN 51 511	-	15W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at -20°C	DIN 51 377	mPa s	6900
Viscosity at 40°C	DIN 51 562	mm2/s	108
Viscosity at 100°C	DIN 51 562	mm2/s	14.0
Viscosity index (VI)	DIN ISO 2909	-	137
COC flash point	DIN ISO 2592	°C	>200
Pour point	DIN ISO 3016	°C	- 40
Total base number	DIN ISO 3771	mgKOH/g	10.5
Sulphated ash	DIN 51 575	g/100 g	1.3

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 183.04 kg.

API class: CI, 4/SL
Measure, l: 208
ACEA class: E7, E5, E3, B4, A3
Approvals/recommendations: MB 228.3 / 229.1, MAN M 3275, Volvo VDS-3, Cummins 20076/20077/20078, MTU type 2, Mack EO-M Plus, Renault RLD-2, Caterpillar ECF-1a, JASO DH-1
Viscosity: 15W40
Oil type: Truck and commercial vehicle lubricants

Oil Fosser Garant LA 15W-40 20l

FOS103720

Brand: Fosser Germany

Warehouses

Price: 62.92
160.06

More information
Analogues
OE numbers
Adaption

Oil Fosser Garant LA 15W-40 20l

FOSSER Garant LA is a high-performance engine oil designed for year-round use in low-emission engines. Engines with turbocharger and charge air cooling require oils that can withstand higher thermal and mechanical loads. This product meets the requirements for such demanding operating conditions even at extended oil change intervals. It ensures reliable cold start at low ambient temperatures and proper lubrication at high operating temperatures.

FOSSER Garant LA is particularly recommended for use in heavy-duty Euro IV and Euro V commercial vehicle engines with exhaust gas aftertreatment system. It is also suitable for use in standard commercial and passenger vehicles with diesel engines with or without turbocharger and in vehicles with petrol engines (mixed fleet). Engine oils of this class are generally recommended where oil change intervals are extended.

TYPICAL VALUES	METHOD	UNIT	FOSSER Garant LA
SAE class	DIN 51 511	-	15W-40
Density at 15°C	DIN 51 757	g/cm3	0.875
Viscosity at -20°C	DIN 51 377	mPa s	6900
Viscosity at 40°C	DIN 51 562	mm2/s	115
Viscosity at 100°C	DIN 51 562	mm2/s	14.9
Viscosity index (VI)	DIN ISO 2909	-	137
COC flash point	DIN ISO 2592	°C	229
Pour point	DIN ISO 3016	°C	- 30
Total base number	DIN ISO 3771	mgKOH/g	7.6
Sulphated ash	DIN 51 575	g/100 g	0.95

The above values may vary within commercially accepted tolerances

Weight: 17.5 kg.

Viscosity: 15W40
Measure, l: 20
ACEA class: E9 / E7
API class: CJ-4 / SM
Approvals/recommendations: MB 228.31 MAN M 3275 / M 3575 Volvo VDS-4 Renault RLD-3 Cat ECF-3 / ECF-2 / ECF-1a Mack EO-O Premium Plus
Oil type: Truck and commercial vehicle lubricants