Oil Fosser Drive Turbo Plus USHPD 10W-40 60l
- Numbers:
- FOS102360
- Brand:
- Fosser
- Warehouses:
- Kaunas (1)
Oil Fosser Drive Turbo Plus USHPD 10W-40 60l
FOSSER Drive Turbo plus USHPD is a high-alloy USHPD low-friction engine oil. Thanks to the use of synthetic base oils and a specially developed additive system, the oil offers excellent oxidation and high-temperature stability. The good dispersing properties of the product prevent deposits on pistons and in the engine that could otherwise impair the performance of the engine. At very low ambient temperatures, FOSSER Drive Turbo plus USHPD guarantees a reliable cold start and fast oil supply to all lube points. The oil is able to cope with all extreme conditions and to reduce friction loss and wear. It also improves the efficiency of engines as both oil and fuel consumption are reduced and the service life of the engine is significantly prolonged.
FOSSER Drive Turbo plus USHPD has been specially developed for the economic oil supply of diesel engines of all types in commercial vehicles. FOSSER Drive Turbo plus USHPD is suitable for year-round use and also meets the requirements of older aspirating engines and stationary diesel units. Oil change intervals might be extended to over 100.000 km, depending on the manufacturer instructions.
Specifications:
ACEA E7/E5/E4 • API CI-4
Approval:
MAN M 3277 / M 3277 CRT
Recommendations*:
MB 228.5
Volvo VDS 3
SCANIA LDF-2
Renault Trucks RXD/RLD 2
Deutz DQC III-05
MTU type 3
TYPICAL VALUES |
METHOD |
UNIT |
FOSSER Drive Turbo plus USHPD |
SAE class |
DIN 51 511 |
- |
10W-40 |
Density at 15°C |
DIN 51 757 |
g/cm3 |
0.866 |
Viscosity at -25°C |
DIN 51 377 |
mPa s |
6500 |
Viscosity at 40°C |
DIN 51 562 |
mm2/s |
89 |
Viscosity at 100°C |
DIN 51 562 |
mm2/s |
13 |
Viscosity index (VI) |
DIN ISO 2909 |
- |
156 |
COC flash point |
DIN ISO 2592 |
°C |
225 |
Pour point |
DIN ISO 3016 |
°C |
- 39 |
Total base number |
DIN ISO 3771 |
mgKOH/g |
15 |
Sulphated ash |
DIN 51 575 |
g/100 g |
1.3 |
The above values may vary within commercially accepted tolerances
* meets the requirements of the OEM manufacturer
- Weight: 51.96 kg.
- API class: CI-4
- Measure, l: 60
- ACEA class: E7, E5, E4
- Approvals/recommendations: MB 228.5, Volvo VDS-3, SCANIA LDF-2, Renault Trucks RXD/RLD 2, Deutz DQC III-05, MTU type 3
- Viscosity: 10W40
- Oil type: Truck and commercial vehicle lubricants