Oils and greases

FOS102160

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 277.20
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Drive Diesel 10W-40 60l

FOSSER Drive Diesel is a semi-synthetic high-performance low-friction engine oil of viscosity class SAE 10W-40 for diesel engines in passenger cars. Its base oil composition combines the advantages of modern refinery products with those of synthetic components. The base oil composition and shear resistant VI enhancers ensure that the product retains its specified viscosity properties during the entire lubrication time. The ageing process of this engine oil is well managed across the permissible oil use time. Antioxidants and cleaning additives prevent deposits, keep pistons and valves clean and protect the engine against cold sludge. The low friction loss in the engine significantly reduces fuel consumption and emissions. Low evaporation loss prevents deposits in valves, sludging and laking, so that pistons and piston ring grooves are kept clean.

FOSSER Drive Diesel is recommended for use in all passenger car diesel engines including models with diesel turbochargers and catalytic converters.

Specifications:

ACEA B4 • API CF

Recommendations*:

MB 229.1

VW standard 505.00

BMW special oils

TYPICAL VALUES	METHOD	UNIT	FOSSER Drive Diesel
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.870
Viscosity at -25°C	DIN 51 377	mPa s	5900
Viscosity at 40°C	DIN 51 562	mm2/s	90
Viscosity at 100°C	DIN 51 562	mm2/s	13.7
Viscosity index (VI)	DIN ISO 2909	-	155
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 33
Total base number	DIN ISO 3771	mgKOH/g	9.5
Sulphated ash	DIN 51 575	g/100 g	1.1

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 52.2 kg.

ACEA class: B4
Approvals/recommendations: MB approval 229.1, VW standard 505.00, BMW special oils
Viscosity: 10W40
Oil type: Light and light commercial vehicle lubricants
API class: CF
Measure, l: 60

Oil Fosser Ultra LL 10W-40 1l

FOS10241

OE number: 10W-40

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (6)

Klaipėda (1)

Šiauliai (5)

Kauno prd (3)

Panevėžys (2)

Kiti sandėliai (4)

Price: 6.40
0

Weight: 0.88 kg.

ACEA class: A3, B3, B4

Approvals/recommendations: MB approval 229.1, VW standard 505.00

Viscosity: 10W40

Oil type: Light and light commercial vehicle lubricants

API class: SL, CF

Measure, l: 1

Capacity [litre]: 1

Packing Type: Bottle

Oil Viscosity Classification SAE: 10W-40

Specification: API SN Plus, SL

Oil: Part Synthetic Oil

Manufacturer Approval: AVTOVAZ Premium

Packaging length [cm]: 39

Packaging width [cm]: 23

Packaging height [cm]: 23,5

Oil - manufacturer recommendation: AAE (STO 003) B7

ACEA specification: A3/B3

API specification: SJ

SAE viscosity class: 10W-40

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Ultra LL 10W-40 1l

FOSSER Ultra LL is a high-performance universal engine oil of viscosity class SAE 10W-40. Base oils produced with the latest refinery technology and carefully selected innovative additives guarantee that the product meets today's practical requirements. Among its most outstanding properties are the excellent lubrication safety at high temperatures and exceptional wear protection under all operating conditions. Cleaning additives prevent deposits, keep pistons and valves clean and protect the engine against black sludge. Clean engines and low friction reduce energy loss in the engine and minimise servicing costs.

FOSSER Ultra LL is a high-performance engine oil for universal use, even under heavy-duty conditions. It is suitable for passenger car petrol and diesel engines with and without charging. It meets the stringent requirements of modern fuel-efficient engines and the latest emissions standards with a generous safety margin.

Specifications:

ACEA A3/B3/B4 • API SL/CF

Recommendations*:

MB 229.1

VW standard 505.00

TYPICAL VALUES	METHOD	UNIT	FOSSER Ultra LL
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at 40°C	DIN 51 562	mm2/s	84
Viscosity at 100°C	DIN 51 562	mm2/s	13
Viscosity index (VI)	DIN ISO 2909	-	158
COC flash point	DIN ISO 2592	°C	218
Pour point	DIN ISO 3016	°C	- 30

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.88 kg.

ACEA class: A3, B3, B4
Approvals/recommendations: MB approval 229.1, VW standard 505.00
Viscosity: 10W40
Oil type: Light and light commercial vehicle lubricants
API class: SL, CF
Measure, l: 1

Capacity [litre]: 1
Packing Type: Bottle
Oil Viscosity Classification SAE: 10W-40
Specification: API SN Plus, SL
Oil: Part Synthetic Oil
Manufacturer Approval: AVTOVAZ Premium
Packaging length [cm]: 39
Packaging width [cm]: 23
Packaging height [cm]: 23,5
Oil - manufacturer recommendation: AAE (STO 003) B7
ACEA specification: A3/B3
API specification: SJ
SAE viscosity class: 10W-40
Customs tariff number: 27101981

Oil Fosser Ultra LL 10W-40 20l

FOS102420

OE number: 10W-40

Brand: Fosser Germany

Warehouses: Kaunas (2)

Price: 85.00
0

Weight: 17.6 kg.

ACEA class: A3, B3, B4

Approvals/recommendations: MB approval 229.1, VW standard 505.00

Viscosity: 10W40

Oil type: Light and light commercial vehicle lubricants

API class: SL, CF

Measure, l: 20

Capacity [litre]: 20

Packing Type: Canister

Specification: API SN Plus, SL

Manufacturer Approval: AVTOVAZ Premium

Packaging length [cm]: 29,5

Packaging width [cm]: 23,7

Packaging height [cm]: 42,8

Oil - manufacturer recommendation: AAE (STO 003) B7

ACEA specification: A3/B3

API specification: SJ

SAE viscosity class: 10W-40

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Ultra LL 10W-40 20l

Specifications:

ACEA A3/B3/B4 • API SL/CF

Recommendations*:

MB 229.1

VW standard 505.00

TYPICAL VALUES	METHOD	UNIT	FOSSER Ultra LL
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at 40°C	DIN 51 562	mm2/s	84
Viscosity at 100°C	DIN 51 562	mm2/s	13
Viscosity index (VI)	DIN ISO 2909	-	158
COC flash point	DIN ISO 2592	°C	218
Pour point	DIN ISO 3016	°C	- 30

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 17.6 kg.

ACEA class: A3, B3, B4
Approvals/recommendations: MB approval 229.1, VW standard 505.00
Viscosity: 10W40
Oil type: Light and light commercial vehicle lubricants
API class: SL, CF
Measure, l: 20

Capacity [litre]: 20
Packing Type: Canister
Specification: API SN Plus, SL
Manufacturer Approval: AVTOVAZ Premium
Packaging length [cm]: 29,5
Packaging width [cm]: 23,7
Packaging height [cm]: 42,8
Oil - manufacturer recommendation: AAE (STO 003) B7
ACEA specification: A3/B3
API specification: SJ
SAE viscosity class: 10W-40
Customs tariff number: 27101981

Oil Fosser Ultra LL 10W-40 208l

FOS1024208

OE number: 10W-40

Brand: Fosser Germany

Warehouses: Kaunas (6)

Kauno prd (1)

Price: 997.50
0

Weight: 183.04 kg.

ACEA class: A3, B3, B4

Viscosity: 10W40

Measure, l: 208

Oil type: Light and light commercial vehicle lubricants

API class: SL, CF

Approvals/recommendations: MB approval 229.1, VW standard 505.00

Capacity [litre]: 208

Packing Type: Barrel

Oil Viscosity Classification SAE: 10W-40

Specification: SL, SJ

Oil: Part Synthetic Oil

Manufacturer Approval: AVTOVAZ Premium

Packaging length [cm]: 58,5

Packaging width [cm]: 58,5

Packaging height [cm]: 88,8

Oil - manufacturer recommendation: AAE (STO 003) B7

ACEA specification: A3/B3

API specification: SJ

SAE viscosity class: 10W-40

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Ultra LL 10W-40 208l

Specifications:

ACEA A3/B3/B4 • API SL/CF

Recommendations*:

MB 229.1

VW standard 505.00

TYPICAL VALUES	METHOD	UNIT	FOSSER Ultra LL
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at 40°C	DIN 51 562	mm2/s	84
Viscosity at 100°C	DIN 51 562	mm2/s	13
Viscosity index (VI)	DIN ISO 2909	-	158
COC flash point	DIN ISO 2592	°C	218
Pour point	DIN ISO 3016	°C	- 30

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 183.04 kg.

ACEA class: A3, B3, B4
Viscosity: 10W40
Measure, l: 208
Oil type: Light and light commercial vehicle lubricants
API class: SL, CF
Approvals/recommendations: MB approval 229.1, VW standard 505.00

Capacity [litre]: 208
Packing Type: Barrel
Oil Viscosity Classification SAE: 10W-40
Specification: SL, SJ
Oil: Part Synthetic Oil
Manufacturer Approval: AVTOVAZ Premium
Packaging length [cm]: 58,5
Packaging width [cm]: 58,5
Packaging height [cm]: 88,8
Oil - manufacturer recommendation: AAE (STO 003) B7
ACEA specification: A3/B3
API specification: SJ
SAE viscosity class: 10W-40
Customs tariff number: 27101981

Oil Fosser Ultra LL 10W-40 4l

FOS10244

OE number: 10W-40

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (9)

Klaipėda (3)

Šiauliai (6)

Kauno prd (6)

Panevėžys (1)

Price: 21.00
0

Weight: 3.52 kg.

ACEA class: A3, B3, B4

Approvals/recommendations: MB approval 229.1, VW standard 505.00

Viscosity: 10W40

Oil type: Light and light commercial vehicle lubricants

API class: SL, CF

Measure, l: 4

Capacity [litre]: 4

Packing Type: Canister

Oil Viscosity Classification SAE: 10W-40

Specification: API SN Plus, SL

Oil: Part Synthetic Oil

Manufacturer Approval: AVTOVAZ Premium

Packaging length [cm]: 40,8

Packaging width [cm]: 28,9

Packaging height [cm]: 26,7

Oil - manufacturer recommendation: AAE (STO 003) B7

ACEA specification: A3/B3

API specification: SJ

SAE viscosity class: 10W-40

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Ultra LL 10W-40 4l

Specifications:

ACEA A3/B3/B4 • API SL/CF

Recommendations*:

MB 229.1

VW standard 505.00

TYPICAL VALUES	METHOD	UNIT	FOSSER Ultra LL
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at 40°C	DIN 51 562	mm2/s	84
Viscosity at 100°C	DIN 51 562	mm2/s	13
Viscosity index (VI)	DIN ISO 2909	-	158
COC flash point	DIN ISO 2592	°C	218
Pour point	DIN ISO 3016	°C	- 30

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 3.52 kg.

ACEA class: A3, B3, B4
Approvals/recommendations: MB approval 229.1, VW standard 505.00
Viscosity: 10W40
Oil type: Light and light commercial vehicle lubricants
API class: SL, CF
Measure, l: 4

Capacity [litre]: 4
Packing Type: Canister
Oil Viscosity Classification SAE: 10W-40
Specification: API SN Plus, SL
Oil: Part Synthetic Oil
Manufacturer Approval: AVTOVAZ Premium
Packaging length [cm]: 40,8
Packaging width [cm]: 28,9
Packaging height [cm]: 26,7
Oil - manufacturer recommendation: AAE (STO 003) B7
ACEA specification: A3/B3
API specification: SJ
SAE viscosity class: 10W-40
Customs tariff number: 27101981

Oil Fosser Ultra LL 10W-40 5l

FOS10245

OE number: 10W-40

Brand: Fosser Germany

Warehouses

Price: 26.00
0

Weight: 4.4 kg.

ACEA class: A3, B3, B4

Approvals/recommendations: MB approval 229.1, VW standard 505.00

Viscosity: 10W40

Oil type: Light and light commercial vehicle lubricants

API class: SL, CF

Measure, l: 5

Capacity [litre]: 4

Packing Type: Canister

Oil Viscosity Classification SAE: 10W-40

Specification: API SN Plus, SL

Oil: Part Synthetic Oil

Manufacturer Approval: AVTOVAZ Premium

Packaging length [cm]: 40,8

Packaging width [cm]: 28,9

Packaging height [cm]: 26,7

Oil - manufacturer recommendation: AAE (STO 003) B7

ACEA specification: A3/B3

API specification: SJ

SAE viscosity class: 10W-40

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Ultra LL 10W-40 5l

Specifications:

ACEA A3/B3/B4 • API SL/CF

Recommendations*:

MB 229.1

VW standard 505.00

TYPICAL VALUES	METHOD	UNIT	FOSSER Ultra LL
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at 40°C	DIN 51 562	mm2/s	84
Viscosity at 100°C	DIN 51 562	mm2/s	13
Viscosity index (VI)	DIN ISO 2909	-	158
COC flash point	DIN ISO 2592	°C	218
Pour point	DIN ISO 3016	°C	- 30

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 4.4 kg.

ACEA class: A3, B3, B4
Approvals/recommendations: MB approval 229.1, VW standard 505.00
Viscosity: 10W40
Oil type: Light and light commercial vehicle lubricants
API class: SL, CF
Measure, l: 5

Capacity [litre]: 4
Packing Type: Canister
Oil Viscosity Classification SAE: 10W-40
Specification: API SN Plus, SL
Oil: Part Synthetic Oil
Manufacturer Approval: AVTOVAZ Premium
Packaging length [cm]: 40,8
Packaging width [cm]: 28,9
Packaging height [cm]: 26,7
Oil - manufacturer recommendation: AAE (STO 003) B7
ACEA specification: A3/B3
API specification: SJ
SAE viscosity class: 10W-40
Customs tariff number: 27101981

Oil Fosser Ultra LL 10W-40 60l

FOS102460

OE number: 10W-40

Brand: Fosser Germany

Warehouses: Kaunas (3)

Vilnius Len (1)

Price: 259.00
0

Weight: 52.8 kg.

ACEA class: A3, B3, B4

Viscosity: 10W40

Measure, l: 60

Oil type: Light and light commercial vehicle lubricants

API class: SL, CF

Approvals/recommendations: MB approval 229.1, VW standard 505.00

Capacity [litre]: 20

Packing Type: Canister

Specification: API SN Plus, SL

Manufacturer Approval: AVTOVAZ Premium

Packaging length [cm]: 29,5

Packaging width [cm]: 23,7

Packaging height [cm]: 42,8

Oil - manufacturer recommendation: AAE (STO 003) B7

ACEA specification: A3/B3

API specification: SJ

SAE viscosity class: 10W-40

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Ultra LL 10W-40 60l

Specifications:

ACEA A3/B3/B4 • API SL/CF

Recommendations*:

MB 229.1

VW standard 505.00

TYPICAL VALUES	METHOD	UNIT	FOSSER Ultra LL
SAE class	DIN 51 511	-	10W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at 40°C	DIN 51 562	mm2/s	84
Viscosity at 100°C	DIN 51 562	mm2/s	13
Viscosity index (VI)	DIN ISO 2909	-	158
COC flash point	DIN ISO 2592	°C	218
Pour point	DIN ISO 3016	°C	- 30

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 52.8 kg.

ACEA class: A3, B3, B4
Viscosity: 10W40
Measure, l: 60
Oil type: Light and light commercial vehicle lubricants
API class: SL, CF
Approvals/recommendations: MB approval 229.1, VW standard 505.00

Capacity [litre]: 20
Packing Type: Canister
Specification: API SN Plus, SL
Manufacturer Approval: AVTOVAZ Premium
Packaging length [cm]: 29,5
Packaging width [cm]: 23,7
Packaging height [cm]: 42,8
Oil - manufacturer recommendation: AAE (STO 003) B7
ACEA specification: A3/B3
API specification: SJ
SAE viscosity class: 10W-40
Customs tariff number: 27101981

Oil Fosser Garant Plus 15W-40 1l

FOS10301

Brand: Fosser Germany

Warehouses: Kaunas (4)

Šiauliai (3)

Price: 5.50
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Garant Plus 15W-40 1l

FOSSER Garant Plus is a mineral high-performance universal engine oil of viscosity class SAE 15W-40. Base oils produced with the latest refinery technology and carefully selected innovative additives guarantee that the product meets today's practical requirements. Among its outstanding properties are the excellent lubrication safety at high temperatures and exceptional wear protection under all operating conditions. Cleaning additives prevent deposits, keep pistons and valves clean and protect the engine against black sludge. Clean engines and low friction reduce energy loss in the engine and minimise servicing costs.

FOSSER Garant Plus is a high-performance engine oil for universal use, even under heavy-duty conditions. It is suitable for passenger car petrol and diesel engines with and without charging. It meets the stringent requirements of modern fuel-efficient engines and the latest emissions standards with a generous safety margin.

Specifications:

ACEA A3/B3/E3 • API SJ/CG-4

Recommendations*:

MB 229.1 / 228.3

VW standards 501.01 / 505.00

Volvo VDS-2

TYPICAL VALUES	METHOD	UNIT	FOSSER Garant Plus
SAE class	DIN 51 511	-	15W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at -20°C	DIN 51 377	mPa s	6400
Viscosity at 40°C	DIN 51 562	mm2/s	100
Viscosity at 100°C	DIN 51 562	mm2/s	13.5
Viscosity index (VI)	DIN ISO 2909	-	135
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 30
Total base number	DIN ISO 3771	mgKOH/g	9

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.88 kg.

ACEA class: A3, B3, E3
Approvals/recommendations: MB approval 229.1/228.3, VW standard 501.01/505.00, Volvo VDS-2
Viscosity: 15W40
Oil type: Engine oils
API class: SJ, CG-4
Measure, l: 1

Oil Fosser Garant Plus 15W-40 20l

FOS103020

Brand: Fosser Germany

Warehouses: Kaunas (2)

Price: 85.00
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Garant Plus 15W-40 20l

Specifications:

ACEA A3/B3/E3 • API SJ/CG-4

Recommendations*:

MB 229.1 / 228.3

VW standards 501.01 / 505.00

Volvo VDS-2

TYPICAL VALUES	METHOD	UNIT	FOSSER Garant Plus
SAE class	DIN 51 511	-	15W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at -20°C	DIN 51 377	mPa s	6400
Viscosity at 40°C	DIN 51 562	mm2/s	100
Viscosity at 100°C	DIN 51 562	mm2/s	13.5
Viscosity index (VI)	DIN ISO 2909	-	135
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 30
Total base number	DIN ISO 3771	mgKOH/g	9

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 17.6 kg.

ACEA class: A3, B3, E3
Approvals/recommendations: MB approval 229.1/228.3, VW standard 501.01/505.00, Volvo VDS-2
Viscosity: 15W40
Oil type: Light and light commercial vehicle lubricants
API class: SJ, CG-4
Measure, l: 20

Oil Fosser Garant Plus 15W-40 4l

FOS10304

Brand: Fosser Germany

Warehouses

Price: 18.50
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Garant Plus 15W-40 4l

Specifications:

ACEA A3/B3/E3 • API SJ/CG-4

Recommendations*:

MB 229.1 / 228.3

VW standards 501.01 / 505.00

Volvo VDS-2

TYPICAL VALUES	METHOD	UNIT	FOSSER Garant Plus
SAE class	DIN 51 511	-	15W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at -20°C	DIN 51 377	mPa s	6400
Viscosity at 40°C	DIN 51 562	mm2/s	100
Viscosity at 100°C	DIN 51 562	mm2/s	13.5
Viscosity index (VI)	DIN ISO 2909	-	135
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 30
Total base number	DIN ISO 3771	mgKOH/g	9

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 3.52 kg.

ACEA class: A3, B3, E3
Measure, l: 4
Viscosity: 15W40
Oil type: Light and light commercial vehicle lubricants
API class: SJ, CG-4
Approvals/recommendations: MB approval 229.1/228.3, VW standard 501.01/505.00, Volvo VDS-2

Oil Fosser Garant Plus 15W-40 5l

FOS10305

Brand: Fosser Germany

Warehouses: Kaunas (6)

Vilnius Len (3)

Šiauliai (1)

Price: 25.40
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Garant Plus 15W-40 5l

Specifications:

ACEA A3/B3/E3 • API SJ/CG-4

Recommendations*:

MB 229.1 / 228.3

VW standards 501.01 / 505.00

Volvo VDS-2

TYPICAL VALUES	METHOD	UNIT	FOSSER Garant Plus
SAE class	DIN 51 511	-	15W-40
Density at 15°C	DIN 51 757	g/cm3	0.880
Viscosity at -20°C	DIN 51 377	mPa s	6400
Viscosity at 40°C	DIN 51 562	mm2/s	100
Viscosity at 100°C	DIN 51 562	mm2/s	13.5
Viscosity index (VI)	DIN ISO 2909	-	135
COC flash point	DIN ISO 2592	°C	225
Pour point	DIN ISO 3016	°C	- 30
Total base number	DIN ISO 3771	mgKOH/g	9

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 4.4 kg.

ACEA class: A3, B3, E3
Approvals/recommendations: MB approval 229.1/228.3, VW standard 501.01/505.00, Volvo VDS-2
Viscosity: 15W40
Oil type: Light and light commercial vehicle lubricants
API class: SJ, CG-4
Measure, l: 5

Oil Fosser Premium GM 5W-30 1l

FOS10121

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 9.00
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Premium GM 5W-30 1l

FOSSER Premium GM is a high-performance low-friction engine oil for passenger cars. Synthetic components combined with carefully selected innovative additives guarantee that the product meets the latest industry requirements. FOSSER Premium GM offers a significantly improved engine oil quality thanks to the further enhanced wear protection and improved engine cleanliness. The low cold viscosity of the lubricant and its safe high-temperature viscosity ensure high fuel consumption reductions.

FOSSER Premium GM is the ideal high-performance low-friction engine oil for demanding engines. It is used in petrol and diesel engines in passenger cars, including models with turbocharger and direct injection. The product is suitable for all operating conditions.

Specifications:

ACEA A3/B4 • API SN/CF

Recommendations*:

MB 229.3

BMW Longlife-01

VW standards 502.00 / 505.00

Opel GM-LL-A-025 / GM-LL-B-025

TYPICAL VALUES	METHOD	UNIT	FOSSER Premium GM
SAE class	DIN 51 511	-	5W-30
Density at 15°C	DIN 51 757	g/cm3	0.855
Viscosity at -25°C	DIN 51 377	mPa s	6150
Viscosity at 40°C	DIN 51 562	mm2/s	70
Viscosity at 100°C	DIN 51 562	mm2/s	11.8
Viscosity index (VI)	DIN ISO 2909	-	165
COC flash point	DIN ISO 2592	°C	238
Pour point	DIN ISO 3016	°C	- 42
Total base number	DIN ISO 3771	mgKOH/g	10.4
Sulphated ash	DIN 51 575	g/100 g	1.4

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.855 kg.

ACEA class: A3, B4
Approvals/recommendations: MB approval 229.3, VW standards 502.00/505.00, BMW Longlife-01, Opel GM-LL-A-025/Opel GM-LL-B-025
Viscosity: 5W30
Oil type: Light and light commercial vehicle lubricants
API class: SN, CF
Measure, l: 1

Oil Fosser Premium GM 5W-30 4l

FOS10124

Brand: Fosser Germany

Warehouses

Price: 30.50
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Premium GM 5W-30 4l

Specifications:

ACEA A3/B4 • API SN/CF

Recommendations*:

MB 229.3

BMW Longlife-01

VW standards 502.00 / 505.00

Opel GM-LL-A-025 / GM-LL-B-025

TYPICAL VALUES	METHOD	UNIT	FOSSER Premium GM
SAE class	DIN 51 511	-	5W-30
Density at 15°C	DIN 51 757	g/cm3	0.855
Viscosity at -25°C	DIN 51 377	mPa s	6150
Viscosity at 40°C	DIN 51 562	mm2/s	70
Viscosity at 100°C	DIN 51 562	mm2/s	11.8
Viscosity index (VI)	DIN ISO 2909	-	165
COC flash point	DIN ISO 2592	°C	238
Pour point	DIN ISO 3016	°C	- 42
Total base number	DIN ISO 3771	mgKOH/g	10.4
Sulphated ash	DIN 51 575	g/100 g	1.4

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 3.42 kg.

Oil type: Light and light commercial vehicle lubricants
Viscosity: 5W30
API class: SN, CF
Measure, l: 4
ACEA class: A3, B3
Approvals/recommendations: MB approval 229.3, VW standards 502.00/505.00, BMW Longlife-01, Opel GM-LL-A-025/Opel GM-LL-B-025

Oil Fosser Premium Longlife III 5W-30 60l

FOS100360

OE number: 5W-30

Brand: Fosser Germany

Warehouses

Price: 459.00
0

More information
Analogues
OE numbers
Adaption

Oil Fosser Premium LA 5W-30 1l

FOS10081

OE number: 5W-30

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (7)

Klaipėda (3)

Šiauliai (8)

Kauno prd (1)

Panevėžys (4)

Kiti sandėliai (2)

Price: 8.50
0

Weight: 0.853 kg.

ACEA class: C3

Approvals/recommendations: MB approval 229.51, VW standards 502.00/505.00/505.01, BMW Longlife-04, GM Dexos 2TM, FIAT 9.55535-S2

Viscosity: 5W30

Oil type: Engine oils

API class: SN, CF

Measure, l: 1

Capacity [litre]: 1

Packing Type: Bottle

Specification: API SN, SM, SL

Oil: Full Synthetic Oil

Manufacturer Approval: GM dexos2

Packaging length [cm]: 39

Packaging width [cm]: 23

Packaging height [cm]: 23,5

Oil - manufacturer recommendation: WSS-M2C917-A

ACEA specification: C3

API specification: SJ

SAE viscosity class: 5W-30

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Premium LA 5W-30 1l

Synthetic high-performance low-friction engine oil with low content of sulphur, ash and phosphor (low SAP) for petrol and diesel engines in passenger cars. Especially for diesel engineswith particle filters (DPF) and also fully compatible with catalyticconverters of petrol engines (CAT’s). Excellent cold start behaviour, high engine cleanliness. Prolongs service life of exhaust gas aftertreatment systems and enhances its performance.

Weight: 0.853 kg.

ACEA class: C3
Approvals/recommendations: MB approval 229.51, VW standards 502.00/505.00/505.01, BMW Longlife-04, GM Dexos 2TM, FIAT 9.55535-S2
Viscosity: 5W30
Oil type: Engine oils
API class: SN, CF
Measure, l: 1

Capacity [litre]: 1
Packing Type: Bottle
Specification: API SN, SM, SL
Oil: Full Synthetic Oil
Manufacturer Approval: GM dexos2
Packaging length [cm]: 39
Packaging width [cm]: 23
Packaging height [cm]: 23,5
Oil - manufacturer recommendation: WSS-M2C917-A
ACEA specification: C3
API specification: SJ
SAE viscosity class: 5W-30
Customs tariff number: 27101981

Oil Fosser Premium LA 5W-30 4l

FOS10084

OE number: 5W-30

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (1)

Klaipėda (3)

Šiauliai (6)

Kauno prd (2)

Panevėžys (3)

Kiti sandėliai (3)

Price: 29.00
0

Weight: 3.41 kg.

ACEA class: C3

Approvals/recommendations: MB approval 229.51, VW standards 502.00/505.00/505.01, BMW Longlife-04, GM Dexos 2TM, FIAT 9.55535-S2

Viscosity: 5W30

Oil type: Engine oils

API class: SN, CF

Measure, l: 4

Capacity [litre]: 1

Packing Type: Bottle

Specification: API SN, SM, SL

Oil: Full Synthetic Oil

Manufacturer Approval: GM dexos2

Packaging length [cm]: 39

Packaging width [cm]: 23

Packaging height [cm]: 23,5

Oil - manufacturer recommendation: WSS-M2C917-A

ACEA specification: C3

API specification: SJ

SAE viscosity class: 5W-30

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Premium LA 5W-30 4l

FOSSER Premium LA is a synthetic high-performance low-friction oil for petrol and diesel engines in passenger cars. It is a low-SAP product with reduced low sulphur, ash and phosphorus content. Base oils produced with the latest synthesis technology and carefully chosen innovative high-performance additives help to reduce the sulphated ash content and guarantee reliable wear protection and keep the engine clean. Excellent cold start behaviour ensures optimum lubrication safety during the cold start phase. The product provides reliable protection under extreme conditions and high temperatures. FOSSER Premium LA is the ideal product for all operating conditions. As it reduces the emission of hazardous substances, it helps to protect the environment.

FOSSER Premium LA has been specially developed for diesel engines with particle filters (DPFs) and is also fully compatible with catalytic converters (CATs) of petrol engines. FOSSER Premium LA prolongs the service life of exhaust gas aftertreatment systems and enhances their performance.

TYPICAL VALUES	METHOD	UNIT	FOSSER Premium LA
SAE class	DIN 51 511	-	5W-30
Density at 15°C	DIN 51 757	g/cm3	0.853
Viscosity at -30°C	DIN 51 377	mPa s	6160
Viscosity at 40°C	DIN 51 562	mm2/s	68,8
Viscosity at 100°C	DIN 51 562	mm2/s	12,0
Viscosity index (VI)	DIN ISO 2909	-	172
COC flash point	DIN ISO 2592	°C	240
Pour point	DIN ISO 3016	°C	- 39
Total base number	DIN ISO 3771	mgKOH/g	7.1
Sulphated ash	DIN 51 575	g/100 g	0.75

The above values may vary within commercially accepted tolerances

Weight: 3.41 kg.

ACEA class: C3
Approvals/recommendations: MB approval 229.51, VW standards 502.00/505.00/505.01, BMW Longlife-04, GM Dexos 2TM, FIAT 9.55535-S2
Viscosity: 5W30
Oil type: Engine oils
API class: SN, CF
Measure, l: 4

Capacity [litre]: 1
Packing Type: Bottle
Specification: API SN, SM, SL
Oil: Full Synthetic Oil
Manufacturer Approval: GM dexos2
Packaging length [cm]: 39
Packaging width [cm]: 23
Packaging height [cm]: 23,5
Oil - manufacturer recommendation: WSS-M2C917-A
ACEA specification: C3
API specification: SJ
SAE viscosity class: 5W-30
Customs tariff number: 27101981

Oil Fosser Premium LA 5W-30 5l

FOS10085

OE number: 5W-30

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Klaipėda (> 10)

Šiauliai (5)

Kauno prd (3)

Panevėžys (4)

Kiti sandėliai (3)

Price: 34.00
0

Weight: 4.265 kg.

ACEA class: C3

Approvals/recommendations: MB approval 229.51, VW standards 502.00/505.00/505.01, BMW Longlife-04, GM Dexos 2TM, FIAT 9.55535-S2

Viscosity: 5W30

Oil type: Engine oils

API class: SN, CF

Measure, l: 5

Capacity [litre]: 1

Packing Type: Bottle

Specification: API SN, SM, SL

Oil: Full Synthetic Oil

Manufacturer Approval: GM dexos2

Packaging length [cm]: 39

Packaging width [cm]: 23

Packaging height [cm]: 23,5

Oil - manufacturer recommendation: WSS-M2C917-A

ACEA specification: C3

API specification: SJ

SAE viscosity class: 5W-30

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Premium LA 5W-30 5l

Weight: 4.265 kg.

ACEA class: C3
Approvals/recommendations: MB approval 229.51, VW standards 502.00/505.00/505.01, BMW Longlife-04, GM Dexos 2TM, FIAT 9.55535-S2
Viscosity: 5W30
Oil type: Engine oils
API class: SN, CF
Measure, l: 5

Capacity [litre]: 1
Packing Type: Bottle
Specification: API SN, SM, SL
Oil: Full Synthetic Oil
Manufacturer Approval: GM dexos2
Packaging length [cm]: 39
Packaging width [cm]: 23
Packaging height [cm]: 23,5
Oil - manufacturer recommendation: WSS-M2C917-A
ACEA specification: C3
API specification: SJ
SAE viscosity class: 5W-30
Customs tariff number: 27101981

Oil Fosser Premium LA 5W-30 60l

FOS100860

OE number: 5W-30

Brand: Fosser Germany

Warehouses: Kaunas (5)

Price: 359.00
0

Weight: 51.18 kg.

ACEA class: C3

Approvals/recommendations: MB approval 229.51, VW standards 502.00/505.00/505.01, BMW Longlife-04, GM Dexos 2TM, FIAT 9.55535-S2

Viscosity: 5W30

API class: SN, CF

Measure, l: 60

Capacity [litre]: 1

Packing Type: Bottle

Specification: API SN, SM, SL

Oil: Full Synthetic Oil

Manufacturer Approval: GM dexos2

Packaging length [cm]: 39

Packaging width [cm]: 23

Packaging height [cm]: 23,5

Oil - manufacturer recommendation: WSS-M2C917-A

ACEA specification: C3

API specification: SJ

SAE viscosity class: 5W-30

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Premium LA 5W-30 60l

Weight: 51.18 kg.

ACEA class: C3
Approvals/recommendations: MB approval 229.51, VW standards 502.00/505.00/505.01, BMW Longlife-04, GM Dexos 2TM, FIAT 9.55535-S2
Viscosity: 5W30
API class: SN, CF
Measure, l: 60

Capacity [litre]: 1
Packing Type: Bottle
Specification: API SN, SM, SL
Oil: Full Synthetic Oil
Manufacturer Approval: GM dexos2
Packaging length [cm]: 39
Packaging width [cm]: 23
Packaging height [cm]: 23,5
Oil - manufacturer recommendation: WSS-M2C917-A
ACEA specification: C3
API specification: SJ
SAE viscosity class: 5W-30
Customs tariff number: 27101981

Oil Fosser Premium LA 5W-40 1l

FOS10171

OE number: 5W-40

Brand: Fosser Germany

Warehouses: Vilnius Len (8)

Klaipėda (1)

Šiauliai (3)

Kauno prd (4)

Panevėžys (1)

Price: 9.00
0

Weight: 0.85 kg.

ACEA class: C3

Approvals/recommendations: MB approval 229.51, BMW Longlife-04, Porsche A40, GM Dexos 2TM, VW standards 502.00/505.00/505.01, FIAT 9.55535-S2

Viscosity: Light and light commercial vehicle lubricants

Oil type: Engine oils

API class: SN, CF

Measure, l: 1

Capacity [litre]: 1

Packing Type: Bottle

Oil Viscosity Classification SAE: 5W-40

Specification: API SN, SM, SL

Oil: Full Synthetic Oil

Manufacturer Approval: PSA B71 2296

Packaging length [cm]: 39

Packaging width [cm]: 23

Packaging height [cm]: 23,5

Oil - manufacturer recommendation: Fiat 9.55535-M2

ACEA specification: A3/B4

API specification: SJ

SAE viscosity class: 5W-40

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Premium LA 5W-40 1l

FOSSER Premium LA 5W- 40 is a synthetic high-performance low-friction oil for petrol and diesel engines in passenger cars. It is a low-SAP product with reduced low sulphur, ash and phosphorus content. Base oils produced with the latest synthesis technology and carefully chosen innovative high-performance additives help reduce the sulphated ash content and guarantee reliable wear protection and keep the engine clean. Excellent cold start behaviour ensures optimum lubrication during the cold start phase. The product provides reliable protection under extreme conditions and high temperatures. FOSSER Premium LA 5W- 40 is recommended for use under all operating conditions and helps protect the environment as it reduces harmful emissions.

FOSSER Premium LA 5W- 40 has been specially developed for diesel engines with particle filters (DPFs) and is also fully compatible with catalytic converters (CATs) of petrol engines. FOSSER Premium LA 5W- 40 prolongs the service life of the exhaust gas aftertreatment systems and enhances its performance.

Specifications:

ACEA C3 • API SN/CF

Recommendations*:

MB 229.51

BMW Longlife-04

Porsche A40

VW standards 502.00 / 505.00 / 505.01

GM Dexos 2™
FIAT 9.55535-S2

TYPICAL VALUES	METHOD	UNIT	FOSSER Premium LA
SAE class	DIN 51 511	-	5W-40
Density at 15°C	DIN 51 757	g/cm3	0.850
Viscosity at 40°C	DIN 51 562	mm2/s	84
Viscosity at 100°C	DIN 51 562	mm2/s	13.9
Viscosity index (VI)	DIN ISO 2909	-	170
COC flash point	DIN ISO 2592	°C	240
Pour point	DIN ISO 3016	°C	- 42
Total base number	DIN ISO 3771	mgKOH/g	7.5

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.85 kg.

ACEA class: C3
Approvals/recommendations: MB approval 229.51, BMW Longlife-04, Porsche A40, GM Dexos 2TM, VW standards 502.00/505.00/505.01, FIAT 9.55535-S2
Viscosity: Light and light commercial vehicle lubricants
Oil type: Engine oils
API class: SN, CF
Measure, l: 1

Capacity [litre]: 1
Packing Type: Bottle
Oil Viscosity Classification SAE: 5W-40
Specification: API SN, SM, SL
Oil: Full Synthetic Oil
Manufacturer Approval: PSA B71 2296
Packaging length [cm]: 39
Packaging width [cm]: 23
Packaging height [cm]: 23,5
Oil - manufacturer recommendation: Fiat 9.55535-M2
ACEA specification: A3/B4
API specification: SJ
SAE viscosity class: 5W-40
Customs tariff number: 27101981

Oil Fosser Premium LA 5W-40 4l

FOS10174

OE number: 5W-40

Brand: Fosser Germany

Warehouses: Kaunas (2)

Vilnius Len (3)

Klaipėda (8)

Šiauliai (3)

Kauno prd (6)

Price: 29.90
0

Weight: 3.4 kg.

ACEA class: C3

Approvals/recommendations: MB approval 229.51, BMW Longlife-04, Porsche A40, GM Dexos 2TM, VW standards 502.00/505.00/505.01, FIAT 9.55535-S2

Viscosity: 5W40

Oil type: Light and light commercial vehicle lubricants

API class: SN, CF

Measure, l: 4

Capacity [litre]: 4

Packing Type: Canister

Oil Viscosity Classification SAE: 5W-40

Specification: API SN, SM, SL

Oil: Full Synthetic Oil

Manufacturer Approval: PSA B71 2296

Packaging length [cm]: 40,8

Packaging width [cm]: 28,9

Packaging height [cm]: 26,7

Oil - manufacturer recommendation: Fiat 9.55535-M2

ACEA specification: A3/B4

API specification: SJ

SAE viscosity class: 5W-40

Customs tariff number: 27101981

More information
Analogues
OE numbers
Adaption

Oil Fosser Premium LA 5W-40 4l

Specifications:

ACEA C3 • API SN/CF

Recommendations*:

MB 229.51

BMW Longlife-04

Porsche A40

VW standards 502.00 / 505.00 / 505.01

GM Dexos 2™
FIAT 9.55535-S2

TYPICAL VALUES	METHOD	UNIT	FOSSER Premium LA
SAE class	DIN 51 511	-	5W-40
Density at 15°C	DIN 51 757	g/cm3	0.850
Viscosity at 40°C	DIN 51 562	mm2/s	84
Viscosity at 100°C	DIN 51 562	mm2/s	13.9
Viscosity index (VI)	DIN ISO 2909	-	170
COC flash point	DIN ISO 2592	°C	240
Pour point	DIN ISO 3016	°C	- 42
Total base number	DIN ISO 3771	mgKOH/g	7.5

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 3.4 kg.

ACEA class: C3
Approvals/recommendations: MB approval 229.51, BMW Longlife-04, Porsche A40, GM Dexos 2TM, VW standards 502.00/505.00/505.01, FIAT 9.55535-S2
Viscosity: 5W40
Oil type: Light and light commercial vehicle lubricants
API class: SN, CF
Measure, l: 4

Capacity [litre]: 4
Packing Type: Canister
Oil Viscosity Classification SAE: 5W-40
Specification: API SN, SM, SL
Oil: Full Synthetic Oil
Manufacturer Approval: PSA B71 2296
Packaging length [cm]: 40,8
Packaging width [cm]: 28,9
Packaging height [cm]: 26,7
Oil - manufacturer recommendation: Fiat 9.55535-M2
ACEA specification: A3/B4
API specification: SJ
SAE viscosity class: 5W-40
Customs tariff number: 27101981

Oil Fosser MZ 80W-90 GL 5 1l

FOS11051

Brand: Fosser Germany

Warehouses: Kaunas (7)

Vilnius Len (3)

Klaipėda (2)

Šiauliai (4)

Kauno prd (2)

Kiti sandėliai (2)

Price: 8.30
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 5 1l

FOSSER MZ 80W-90 GL-5 is made from carefully chosen base oils and additives. The EP additives in the product form a load-bearing lubricant film on the tooth flanks that prevent fretting even under extreme mechanical load and significantly reduce abrasion. The gear oil is extremely aging resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refinery of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion. FOSSER MZ 80W-90 GL-5 does not cause damage to conventional sealing materials.

FOSSER MZ 80W-90 GL-5 is recommended for gear systems with hypoid and bevel gears used in axle drive systems in passenger and commercial vehicles. It is also widely used in motorbike universal drive systems and manual gearboxes, unless the use of an engine oil is prescribed.

Specifications:

API GL-5 • MIL-L-2105 C/D

Recommendations*:

MB 235.0

MAN 342 type M-1

Ford SQM-2C-9002 AA

ZF TE-ML 16C/17B/19B/21A

Voith 3.325-339

Volvo 97310

DAF

TYPICAL VALUES	METHOD	UNIT	FOSSER MZ 80W-90 GL-5
SAE class	DIN 51 511	-	80W-90
Density at 15°C	DIN 51 757	g/cm3	0.897
Viscosity at -12°C	DIN 51 398	mm2/s	-
Viscosity at -26°C	DIN 51 398	mm2/s	130.000
Viscosity at 40°C	DIN ISO 3104	mm2/s	140
Viscosity at 100°C	DIN ISO 3104	mm2/s	13,9
Viscosity index (VI)	DIN ISO 2909	-	98
COC flash point	DIN ISO 2592	°C	210
Pour point	DIN ISO 3016	°C	- 30
FZG test A/8.3/90	DIN 51 354	SKS	>12

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.897 kg.

API class: GL-5
Measure, l: 1
Approvals/recommendations: MB approval 235.0, MAN 342 Typ M-1, Ford SQM-2C-9002 AA, ZF TE-ML 16C/17B/19B/21A, Voith 3.325-339, Volvo 97310, DAF
Specification: MIL-L-2105 C/D
Viscosity: 80W90
Oil type: Transmission Fluids

Oil Fosser MZ 80W-90 GL 5 208l

FOS1105208

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 1.073.60
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 5 208l

FOSSER MZ 80W-90 GL-5 is made from carefully chosen base oils and additives. The EP additives in the product form a load-bearing lubricant film on the tooth flanks that prevent fretting even under extreme mechanical load and significantly reduce abrasion. The gear oil is extremely aging resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refinery of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion. FOSSER MZ 80W-90 GL-5 does not cause damage to conventional sealing materials.

FOSSER MZ 80W-90 GL-5 is recommended for gear systems with hypoid and bevel gears used in axle drive systems in passenger and commercial vehicles. It is also widely used in motorbike universal drive systems and manual gearboxes, unless the use of an engine oil is prescribed.

TYPICAL VALUES	METHOD	UNIT	FOSSER MZ 80W-90 GL-5
SAE class	DIN 51 511	-	80W-90
Density at 15°C	DIN 51 757	g/cm3	0.897
Viscosity at -12°C	DIN 51 398	mm2/s	-
Viscosity at -26°C	DIN 51 398	mm2/s	130.000
Viscosity at 40°C	DIN ISO 3104	mm2/s	140
Viscosity at 100°C	DIN ISO 3104	mm2/s	13,9
Viscosity index (VI)	DIN ISO 2909	-	98
COC flash point	DIN ISO 2592	°C	210
Pour point	DIN ISO 3016	°C	- 30
FZG test A/8.3/90	DIN 51 354	SKS	>12

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 185.96 kg.

API class: GL-5
Measure, l: 208
Viscosity: 80W90
Specification: MIL-L-2105 C/D
Approvals/recommendations: MB approval 235.0, MAN 342 Typ M-1, Ford SQM-2C-9002 AA, ZF TE-ML 16C/17B/19B/21A, Voith 3.325-339, Volvo 97310, DAF
Oil type: Transmission Fluids

Oil Fosser MZ 80W-90 GL 5 4l

FOS11054

Brand: Fosser Germany

Warehouses: Kaunas (9)

Vilnius Len (4)

Klaipėda (2)

Šiauliai (2)

Price: 30.40
0

More information
Analogues
OE numbers
Adaption

Oil Fosser MZ 80W-90 GL 5 4l

Specifications:

API GL-5 • MIL-L-2105 C/D

Recommendations*:

MB 235.0

MAN 342 type M-1

Ford SQM-2C-9002 AA

ZF TE-ML 16C/17B/19B/21A

Voith 3.325-339

Volvo 97310

DAF

TYPICAL VALUES	METHOD	UNIT	FOSSER MZ 80W-90 GL-5
SAE class	DIN 51 511	-	80W-90
Density at 15°C	DIN 51 757	g/cm3	0.897
Viscosity at -12°C	DIN 51 398	mm2/s	-
Viscosity at -26°C	DIN 51 398	mm2/s	130.000
Viscosity at 40°C	DIN ISO 3104	mm2/s	140
Viscosity at 100°C	DIN ISO 3104	mm2/s	13,9
Viscosity index (VI)	DIN ISO 2909	-	98
COC flash point	DIN ISO 2592	°C	210
Pour point	DIN ISO 3016	°C	- 30
FZG test A/8.3/90	DIN 51 354	SKS	>12

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 3.588 kg.

API class: GL-5
Measure, l: 4
Approvals/recommendations: MB approval 235.0, MAN 342 Typ M-1, Ford SQM-2C-9002 AA, ZF TE-ML 16C/17B/19B/21A, Voith 3.325-339, Volvo 97310, DAF
Specification: MIL-L-2105 C/D
Viscosity: 80W90
Oil type: Transmission Fluids

Oil Fosser Syn 75W-90 GL4/GL5 1l

FOS11091

OE number: 75W-90

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (10)

Klaipėda (7)

Šiauliai (8)

Panevėžys (4)

Price: 12.00
0

Weight: 0.866 kg.

API class: MT-1, GL-4, GL-5, MIL-PRF-2105E, SAEJ2360

Measure, l: 1

Approvals/recommendations: MB approval 235.8 (задний мост), MAN 3343 Tип S (ex 3343 Tип SL), SCANIA STO 1:0; MACK GO-J, ZF TE-ML 02B/05B/07A/12B/16F/17B/19C/21B

Viscosity: 75W90

Oil type: Transmission Fluids

Capacity [litre]: 20

Packing Type: Canister

Manufacturer Approval: KOMATSU

Packaging length [cm]: 29,5

Packaging width [cm]: 23,7

Packaging height [cm]: 42,8

Oil - manufacturer recommendation: 341 Typ E3

API specification: MT-1

SAE viscosity class: 75W-90

Customs tariff number: 34031980

More information
Analogues
OE numbers
Adaption

Oil Fosser Syn 75W-90 GL4/GL5 1l

FOSSER Syn is a fully synthetic low-friction gear oil for manual transmissions and heavy-duty axle drives. Compared with conventional gear oils FOSSER Syn offers the following advantages:

• Excellent low-temperature properties

• Outstanding thermal stability

• Extremely high viscosity index

• Great shear stability

• Cold shift noise prevention and sound level reduction

• Unrivalled corrosion protection

• Fuel consumption reduction

• Prolonged oil change intervals

• Low abrasion for prolonged gear service life

FOSSER Syn is designed for universal use along the entire power transmission line (Total Drive Line) including synchronised and non-synchronised manual transmissions, axle gears with and without hypoid meshing and transfer gearboxes in passenger cars and commercial vehicles.

Specifications:

API MT-1; GL-4 / GL-5 • MIL-PRF-2105 E • SAE J 2360

Recommendations*:

MB 235.8

MAN 3343 type S (ex 3343 type SL)

DAF (rear axle)
SCANIA STO 1:0
MACK GO-J
ZF TE-ML 02B/05B/07A/12B/16F/17B/19C/21B

TYPICAL VALUES	METHOD	UNIT	FOSSER Syn
SAE class	DIN 51 512	-	75W-90
Density at 15°C	DIN 51 757	g/cm3	0.866
Viscosity at 40°C	DIN ISO 3104	mm2/s	101
Viscosity at 100°C	DIN ISO 3104	mm2/s	15
Viscosity at -40°C	CEC L18-A80	mPa.s	66000
Viscosity index (VI)	DIN ISO 2909	-	157
COC flash point	DIN ISO 2592	°C	190
Pour point	DIN ISO 3016	°C	-48

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 0.866 kg.

API class: MT-1, GL-4, GL-5, MIL-PRF-2105E, SAEJ2360
Measure, l: 1
Approvals/recommendations: MB approval 235.8 (задний мост), MAN 3343 Tип S (ex 3343 Tип SL), SCANIA STO 1:0; MACK GO-J, ZF TE-ML 02B/05B/07A/12B/16F/17B/19C/21B
Viscosity: 75W90
Oil type: Transmission Fluids

Capacity [litre]: 20
Packing Type: Canister
Manufacturer Approval: KOMATSU
Packaging length [cm]: 29,5
Packaging width [cm]: 23,7
Packaging height [cm]: 42,8
Oil - manufacturer recommendation: 341 Typ E3
API specification: MT-1
SAE viscosity class: 75W-90
Customs tariff number: 34031980

Oil Fosser Syn 75W-90 GL4/GL5 4l

FOS11094

OE number: 75W-90

Brand: Fosser Germany

Warehouses: Kaunas (2)

Vilnius Len (1)

Klaipėda (2)

Šiauliai (2)

Panevėžys (1)

Price: 41.00
0

Weight: 3.465 kg.

API class: MT-1, GL-4, GL-5, MIL-PRF-2105E, SAEJ2360

Measure, l: 4

Approvals/recommendations: MB approval 235.8 (задний мост), MAN 3343 Tип S (ex 3343 Tип SL), SCANIA STO 1:0; MACK GO-J, ZF TE-ML 02B/05B/07A/12B/16F/17B/19C/21B

Viscosity: 75W90

Oil type: Transmission Fluids

Capacity [litre]: 20

Packing Type: Canister

Manufacturer Approval: KOMATSU

Packaging length [cm]: 29,5

Packaging width [cm]: 23,7

Packaging height [cm]: 42,8

Oil - manufacturer recommendation: 341 Typ E3

API specification: MT-1

SAE viscosity class: 75W-90

Customs tariff number: 34031980

More information
Analogues
OE numbers
Adaption

Oil Fosser Syn 75W-90 GL4/GL5 4l

• Excellent low-temperature properties

• Outstanding thermal stability

• Extremely high viscosity index

• Great shear stability

• Cold shift noise prevention and sound level reduction

• Unrivalled corrosion protection

• Fuel consumption reduction

• Prolonged oil change intervals

• Low abrasion for prolonged gear service life

Specifications:

API MT-1; GL-4 / GL-5 • MIL-PRF-2105 E • SAE J 2360

Recommendations*:

MB 235.8

MAN 3343 type S (ex 3343 type SL)

DAF (rear axle)
SCANIA STO 1:0
MACK GO-J
ZF TE-ML 02B/05B/07A/12B/16F/17B/19C/21B

TYPICAL VALUES	METHOD	UNIT	FOSSER Syn
SAE class	DIN 51 512	-	75W-90
Density at 15°C	DIN 51 757	g/cm3	0.866
Viscosity at 40°C	DIN ISO 3104	mm2/s	101
Viscosity at 100°C	DIN ISO 3104	mm2/s	15
Viscosity at -40°C	CEC L18-A80	mPa.s	66000
Viscosity index (VI)	DIN ISO 2909	-	157
COC flash point	DIN ISO 2592	°C	190
Pour point	DIN ISO 3016	°C	-48

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 3.465 kg.

API class: MT-1, GL-4, GL-5, MIL-PRF-2105E, SAEJ2360
Measure, l: 4
Approvals/recommendations: MB approval 235.8 (задний мост), MAN 3343 Tип S (ex 3343 Tип SL), SCANIA STO 1:0; MACK GO-J, ZF TE-ML 02B/05B/07A/12B/16F/17B/19C/21B
Viscosity: 75W90
Oil type: Transmission Fluids